What does white ink hot painting mean? What is a white ink hot painting printer, hot stamping machine can iron all kinds of hot painting on cotton, linen, chemical fiber and other fabrics, but also screen printing, glue, foaming and other processes heat treatment, suitable for making cultural shirts, etc., economical and useful, beautiful pictures. It is replacing traditional embroidery and screen printing, but the cost and role are much lower than and better than general embroidery and multi-color screen printing.
There are two kinds of ironing machines related to the clothing industry: flat ironing machines mainly used on clothing fabrics, and hat ironing machines with arcs for hats, which can be divided into manual, pneumatic and hydraulic according to the operating power.
White ink hot stamping printers have three main concepts, which are pressure, temperature, and time. Its working mechanism is to heat up through the heating plate, and use a certain pressure, specific temperature and time to bond the layer and thermosetting on the transfer paper to the substrate or penetrate into the substrate.
The core component of the white ink hot stamping printer is the heating plate, so you should pay attention to it when choosing a hot stamping machine. The upper and lower plates should be made of aluminum, and the heating pipe should be cast inside the aluminum plate. If the upper plate is an aluminum plate slotted, and then attached to it with a heating tube, it will cause unnecessary energy loss, and there will be defects such as slow heating and large constant temperature difference when used.
If the lower plate is an iron plate or other material, long-term work in a high temperature and high pressure environment will be very simple to deform and age. According to the area of the heating plate is different, the upper and lower plates have weight standards, if it is too light and too thin, the heating plate will be simply deformed, affecting the application. In general, the greater the weight, the more reliable the performance.
After the upper plate of the ironing machine is pressed, it should be absolutely parallel to the lower plate. If the upper and lower board bite is tested whether the bite is tight, you can put a piece of hard paper or other sheet resistant material object at the four corners, and then press the handle down, and after the upper and lower board bite is clamped, pull the piece of hard paper outward, you can know whether the upper and lower boards are flat and whether the machine is qualified.
